The technical content on https://siemens-thermal.electrosource.com — including descriptions of thermal simulation and electronics cooling products, methodologies, example results, and application guidance — is provided for general information only and does not constitute engineering advice.
Please note:
- Simulation results vary. Outputs from tools such as Simcenter FloTHERM, FloEFD, STAR-CCM+, Amesim, HEEDS, and the MicReD measurement suite depend on the specific inputs, assumptions, material properties, and boundary conditions applied. Results shown on the Site are illustrative and are not representative of any particular design.
- Product performance depends on user inputs. Real-world performance depends on how a product or model is configured and used.
- Models require engineering judgment. Simulation and analysis are aids to, not substitutes for, qualified engineering judgment.
- Validation testing is recommended. Physical validation and measurement (for example, using T3STER/TeraLED or Power Tester hardware) are recommended before relying on simulated results for design or production decisions.
- No liability for design decisions. Electro Source Inc. is not liable for any engineering, design, or procurement decision made solely on the basis of information presented on this Site. Users remain responsible for validating their own engineering decisions and for consulting official Siemens documentation.
By using the Site, you acknowledge and accept this Engineering Disclaimer. Questions may be directed to siemens.thermal@electrosource.com.